12 Volt 2 Amp Video Regulator

Excl. VAT: £12.49 Incl. VAT: £14.99

Availability: Pre Order

Pre-Order
Excl. VAT: £12.49 Incl. VAT: £14.99
We Accept: Visa Paypal Amex Master Card
Description

12 Volt 2 Amp Video Regulator

 

This 12 Volt 2 Amp Video Regulator board is a great way for many aircraft using FPV (First Person View) systems to have a 12 volt power supply on board the aircraft if they are powered by 4 to 6s batteries, if you need a way to deliver a stable power supply to run your video systems with 4S+ batteries this power unit is answer.

 

You can use this power unit with 13 – 24 Volts and have a steady noise free output  with12 Volts @ 2Amps. The power unit is based on low dropout linear regulator; the linear regulator does not create any ripple current that can cause problems with your video system which are seen on non-regulated systems.

 

The 12 Volt 2 Amp Video Regulator board is supplied with male pin headers, these need to be soldered to the board. These Jumper cable 2 pin female 15cm are a good choice to match with the pin headers on both the input and output side of the board.

 

Features:

  • Input voltage: 13 - 24V.

  • Output voltage: 12 Volts @ 2 Amp.

  • Size: 32 x 18mm.

  • Weight: 4gr.

  • Power Inputs: 1.

  • Power Outputs: 3.

In The Box

12 Volt 2 Amp Video Regulator

 

This 12 Volt 2 Amp Video Regulator board is a great way for many aircraft using FPV (First Person View) systems to have a 12 volt power supply on board the aircraft if they are powered by 4 to 6s batteries, if you need a way to deliver a stable power supply to run your video systems with 4S+ batteries this power unit is answer.

 

You can use this power unit with 13 – 24 Volts and have a steady noise free output  with12 Volts @ 2Amps. The power unit is based on low dropout linear regulator; the linear regulator does not create any ripple current that can cause problems with your video system which are seen on non-regulated systems.

 

The 12 Volt 2 Amp Video Regulator board is supplied with male pin headers, these need to be soldered to the board. These Jumper cable 2 pin female 15cm are a good choice to match with the pin headers on both the input and output side of the board.

 

Features:

  • Input voltage: 13 - 24V.

  • Output voltage: 12 Volts @ 2 Amp.

  • Size: 32 x 18mm.

  • Weight: 4gr.

  • Power Inputs: 1.

  • Power Outputs: 3.

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register