Sonar cable 3 pin 24cm

Excl. VAT: £1.50 Incl. VAT: £1.80

Availability: Pre Order

Pre-Order
Excl. VAT: £1.50 Incl. VAT: £1.80
We Accept: Visa Paypal Amex Master Card
Description
Sonar Unit Connection Cable, 3pin
Colors: Black, Red, Yellow
Length: 24cm

Usage: This cable is ideal cable to connect Maxbotix UltraSonar's to your ArduCopter electronics.
Solder the open end to the Maxbotix sonar unit and the other end then connects on to the pin male pin header on the ArduPilotMega IMU board.
Reviews

Customer Reviews 7 item(s)

Perfect
Excellent.

Fast shipping. Very serious compagny, thanks
Your Rating
Review by didier dubreuil / (Posted on 06/08/2013)
Good product, speedy delivery, great service.
A cable is a cable. Though I didn't end up using this on the Sonar, as it needed more pins.
Your Rating
Review by John Livesey / (Posted on 06/08/2013)
First order for some parts
Parts arrived very promptly and were the correct items, Just as I'd have expected so thank you
Your Rating
Review by Matthew Wright / (Posted on 06/08/2013)
Well, it's just a cable... :)
Nothing wrong with it at all, really, except that the connector in the sensor board end could have been slightly shorter. That would have made it easier to fit the connector between the sensor board and the mounting plate in the 3DR kit.
Your Rating
Review by Joakim Rydell / (Posted on 06/08/2013)
Sonar cable 3 pin 24cm
Essential to connect sonar/range finder.
Your Rating
Review by Mike Perkins / (Posted on 06/08/2013)
Sonar cable 3 pin 24cm
Actually it is a wrong type of cable. All the threads mention that a shielded cable must be used. So, there should be provided a shielded lightweight cable for the sonar.

Hello Nikolaos, The shielded cable is only needed if you are running the cable past high EMI caused by battery wires or ESC's etc. If you do not run the wire in these "zones" there is not a need for a cable shield. I will look into finding a "sleeve" to offer as an additional option on this product, thank you for your review!

Regards

Martin.
Your Rating
Review by NIKOLAOS KOUVARAS / (Posted on 06/08/2013)
Sonar cable 3 pin 24cm
Cable ok
Your Rating
Review by Stefano Marsetti / (Posted on 06/08/2013)

Customer Reviews 7 item(s)

Perfect
Excellent.

Fast shipping. Very serious compagny, thanks
Your Rating
Review by didier dubreuil / (Posted on 06/08/2013)
Good product, speedy delivery, great service.
A cable is a cable. Though I didn't end up using this on the Sonar, as it needed more pins.
Your Rating
Review by John Livesey / (Posted on 06/08/2013)
First order for some parts
Parts arrived very promptly and were the correct items, Just as I'd have expected so thank you
Your Rating
Review by Matthew Wright / (Posted on 06/08/2013)
Well, it's just a cable... :)
Nothing wrong with it at all, really, except that the connector in the sensor board end could have been slightly shorter. That would have made it easier to fit the connector between the sensor board and the mounting plate in the 3DR kit.
Your Rating
Review by Joakim Rydell / (Posted on 06/08/2013)
Sonar cable 3 pin 24cm
Essential to connect sonar/range finder.
Your Rating
Review by Mike Perkins / (Posted on 06/08/2013)
Sonar cable 3 pin 24cm
Actually it is a wrong type of cable. All the threads mention that a shielded cable must be used. So, there should be provided a shielded lightweight cable for the sonar.

Hello Nikolaos, The shielded cable is only needed if you are running the cable past high EMI caused by battery wires or ESC's etc. If you do not run the wire in these "zones" there is not a need for a cable shield. I will look into finding a "sleeve" to offer as an additional option on this product, thank you for your review!

Regards

Martin.
Your Rating
Review by NIKOLAOS KOUVARAS / (Posted on 06/08/2013)
Sonar cable 3 pin 24cm
Cable ok
Your Rating
Review by Stefano Marsetti / (Posted on 06/08/2013)

Write Your Own Review

Only registered users can write reviews. Please, log in or register