Scout 3 Carbon Fiber ARTF Quadcopter Kit

Regular Price: £510.00

Special Price Excl. VAT: £390.00 Incl. VAT: £468.00

Availability: Pre Order


Regular Price: £510.00

Special Price Excl. VAT: £390.00 Incl. VAT: £468.00

We Accept: Visa Paypal Amex Master Card

The Scout 3 Carbon Fiber ARTF UAV is the almost ready to fly version of Scout 3. This quadcopter kit comes with an Arduino Mini flight controller and a 6 degrees of freedom Sensor Board (IMU). The Arduino Mini and IMU gives Scout 3 the ability to auto-stablilize.


All electronics and wiring come soldered. The flight controller comes pre-programmed and tuned for the Scout 3.


If needed the Scout 3 can be further configured via FTDI Breakout or XBee's on a PC or Mac.


The Scout's airframe is made of carbon fiber, which provides a very strong yet lightweight airframe which is designed to be rugged and have the ability for long flight times.


User Guide and build instructions for Scout 3 UAV




This kit includes:

  • 1 Carbon Fibre Airframe.

  • 4 ESC's.

  • 4 Motors.

  • 4 Propellers (2 cw 2 ccw).

  • Power distribution cable with XT60 connectors and one XT60 connector for a battery.

  • Mounting hardware for the Flight Controller.

  • Flight Controller.

Note: This kit is shipped unassembled. Everything comes already soldered. It is recommended to balance the prop's before flying.



  • Airframe supports:Plus and X flying modes

  • Dimension: 17.75" x 17.75" (diagonal) x 4.5" / 3.25" - (451mm x 451mm (diagonal) x 114.3mm / 82.55mm)

  • Flying Weight (airframe, motors, ESC's, propellers, ArduPilot Mega, IMU and cables - no battery):700g

  • Total Payload Capacity (shared with battery weight):600g

  • Average Flight Time: 14 minutes with one 11.1v 3000mAh battery

  • 25 minutes with two 11.1v 3000mAh batteries

The battery bay can accommodate two 11.1v 3000 mAh batteries or smaller.



Kit comes unassembled.


Write Your Own Review

Only registered users can write reviews. Please, log in or register