Lumenier QAV250 G10 Airframe Only Kit V2

Excl. VAT: £58.32 Incl. VAT: £69.98

Availability: Pre Order

Pre-Order
Excl. VAT: £58.32 Incl. VAT: £69.98
We Accept: Visa Paypal Amex Master Card
Description

The QAV250 G10 Airframe Only Kit V2 from Lumenier is a small lightweight First Person View racing quad. The QAV250 is a symmetric 250mm size airframe that accommodates 5" props while still allowing for a fully functional First Person View quadcopter.

The QAV250 is designed to support a 3s LiPo battery when using the Lumenier motors such as the RX2204-14 2300Kv.These small motors offer a good level of thrust while maintaining the lowest weight possible. Made from G10 the QAV250 is not only light but offers a good level of crash resistance, the strength of the QAV250 system comes from the main frame board being one solid part, known as a UnibodyThere are landing legs which can be installed on the arms if required. The motor mounting points have been cut into the frame to allow a number of motor options to fit, each arm has an additional few mm’s of material which will allow the motors to be protected from knocks and bumps.

There are 2 power distribution boards integrated in to the QAV250 airframe which allow easy connection and configuration of the electronics for the ESC’s and the First Person View system. There are two LED boards for visual navigation which assist with orientation of the craft when not using with FPV equipment, these are white and red in colour. The flight controller cover board has cutouts for SMA connectors and adapters used with FPV equipment..

The airframe of the QAV250 is only 170 grams, this includes landing legs, LED’s and power boards. The recommended battery for the QAV250 is a 3s lipo with the maximum dimensions of 70 x 32 x 22 mm’s with a 35 C rating. The recommended all up weight on the QAV250 for take-off is 500 grams.

Cameras supported on the QAV250 are 32mm board cameras and other small cased cameras like the FatShark 700TVL WDR CMOS camera. The Mobius and GoPro cameras are also supported on the QAV250 systems.


The QAV250 G10 Airframe Kit comes supplied with:  

 

 

The QAV250 build manual can be found here.

Reviews

Customer Reviews 1 item(s)

Really sturdy miniquad
I have really enjoyed building my first mini fpv quad using this frame.
Build is very easy as there is a good manual on Lumenier site as well there are a couple of youtube videos on how to assemble this frame. A bit pricey compared with some other Chinese options but on the other side the quality is really good and frame if very tough. Really recommended to any beginner or pro!
Your Rating
Review by CLAUDIU / (Posted on 11/05/2015)

Customer Reviews 1 item(s)

Really sturdy miniquad
I have really enjoyed building my first mini fpv quad using this frame.
Build is very easy as there is a good manual on Lumenier site as well there are a couple of youtube videos on how to assemble this frame. A bit pricey compared with some other Chinese options but on the other side the quality is really good and frame if very tough. Really recommended to any beginner or pro!
Your Rating
Review by CLAUDIU / (Posted on 11/05/2015)

Write Your Own Review

Only registered users can write reviews. Please, log in or register