OpenPilot CC3D Evo Flight Controller with STM32 with Straight Pin Headers

Excl. VAT: £11.24 Incl. VAT: £13.49

Availability: Pre Order

Excl. VAT: £11.24 Incl. VAT: £13.49
We Accept: Visa Paypal Amex Master Card

The OpenPilot CC3D Evo flight controller is designed around the open source OpenPilot firmware to control your plane or multi rotor up to a hexacopter platform. It will cater for a number of different flying styles whether you want to be a racer an acrobatic pilot or arial photographer the CC3D will be at home and excel at each and every role. The Evo comes with the added advantage of having a flexiport which can be used either as an I2C port or a second serial port. The CC3D Evo flight controller allows for up to two spektrum satellites to be connected without the need for a converter cable. For ease of use the board comes pre-soldered with straight headers for the ESC outputs meaning the CC3D Evo is completely plug and play.



  • Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.

  • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.

  • Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.

  • Software support for Windows, Mac and Linux.

  • Direct high speed USB support with no drivers required, a truly plug and play device.

  • Spektrum satellite receiver support.

  • Futaba S-BUS receiver support.

  • Innovative Flexi-port technology for superior port flexibility.

  • 4Mbits on-board EEPROM for configuration storage.



  • 6 DOF for accurate flight control. Support for several common RC inputs, 6 PWM channels, combined PPM, Spektrum / JR DSM2, DSMX satellites and Futaba sBus receivers.

  • Simultaneous support for multiple receivers.

  • ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 6 PWM output channels.

  • MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites.

  • FlexiPort (configurable): serial telemetry, GPS, Spektrum / JR satellites, or I2C peripherals (under development).

  • 6 PWM outputs to servos or ESC’s, or for camera stabilization.

  • Camera stabilization: supports up to 3 axis camera mounts with stabilisation and manual control from any of configured receivers.

  • Onboard USB connectivity for easy configuration.

  • Mini USB and serial telemetry and configuration.

  • Supported by powerful OpenPilot GCS.

  • 4 Mbit onboard memory.

  • 3C Quaternion based complementary filter running at 500Hz.


In The Box 

  • 1 x CC3D EVO Flight Controller

  • 1 x 6 pin JST-SH cable for PWM receiver connection 

  • 2 x 4 pin JST-SH cable for expansion ports


Write Your Own Review

Only registered users can write reviews. Please, log in or register