Lumenier TX5GA 5.8GHz Adjustable RF Power 25mw, 200mw 600mw FPV Video Transmitter

Excl. VAT: £0.00 Incl. VAT: £0.00

Availability: Pre Order

Excl. VAT: £0.00 Incl. VAT: £0.00
We Accept: Visa Paypal Amex Master Card

The Lumenier TX5GA has now been replaced with the TBS Unify Pro 5.8GHz SMA V3 FPV Vieo Transmitter.

The Lumenier TX5GA Adjustable RF Power 25mw, 200mw & 600mW 5.8GHz 32CH FPV video transmitter builds on Lumenier’s knowledge of FPV racing and pedigree to produce a selectable RF power Vtx . This transmitter features the ability to adjust the transmission power, from 25mW, 200mW, or 600mW for long range. The lower 25mW and 200mW transmission power means that more people can fly together and you only have to transmit the amount of power you want. The Lumenier TX5GA has 32 channels and now includes the new Raceband frequencies. This is compatible with most brands of equipment and has guaranteed compatibility with all of the ImmersionRC and Fatshark recievers, such as the ImmersionRC Uno 5800 or Fatshark NexWave Module.

The TX5GA features an easy to use single button, LED interface. It also comes with a clean pre-wired harness, and only weighs 12g. It’s perfect for a wide range of aircraft!

Note: The metal housing of the Lumenier TX5GAacts as a heatsink and dissipates heat, mount in an area where there is good airflow. Do not power on the transmitter for long periods of time on the ground while on 600Mw mode without active cooling as the transmitter may overheat.


  •  32 channels: Cover F, E, A bands and R (Raceband) bands

  • Intuitive and easy to use button and LEDs for frequency  and power selection

  • Small sized and light weight

  • Transmitter frequency: 5658-5925MHz with 25 - 600mW power output

  • Transmitting distance >  ~2000m (open area at 600mW)

  • SMA Antenna connector

  • Dimensions: 38 x 28 x 9mm (not including SMA adapter)




  • Operating Voltage: 7 - 19V (2-4s Lipo)

  • Output Voltage: 5v

  • Supply current: ~220 mA

  • Operating Temperature: -10 +85 C

  • Video Band Width: 0-8.0 MHz

  • Audio carrier Frequency: 6.5 MHz

  • Video Input Level: 0.8,1.0,1.2 Vp-p

  • Video Input Impedance: 75 Ohm

  • Audio Input Level: 0.5 ,2.0 Vp-p

  • Audio Input Impedance: 10K Ohm

  • Weight: 12g (without antenna)

  • Antenna Connector: SMA Female Connector

  • Video Format: NTSC/PAL

  • Output Impedance: 50 Ohm

  • Output Power: 26, 26.5, 27 dBm

  • Frequency Selection: Single push to change CH, push and hold for 2 seconds to change FR

  • RF Power Selection: Press the PWR button once to change the output RF Power.


Write Your Own Review

Only registered users can write reviews. Please, log in or register