Lumenier QAV250 Mini FPV Quadcopter V1.1 Carbon Fiber Edition

Excl. VAT: £96.66 Incl. VAT: £115.99

Availability: Pre Order

Pre-Order
Excl. VAT: £96.66 Incl. VAT: £115.99
We Accept: Visa Paypal Amex Master Card
Description

The Lumenier QAV250 Mini FPV Quadcopter V1.1 Carbon Fiber Edition is a small lightweight First Person View racing quad. The QAV250 Mini FPV Quadcopter V1.1 Carbon Fiber Edition is made from 3mm 3K carbon fiber which gives excellent crash resistance, the symmetric 250mm size airframe accommodates 5" props while still allowing for a fully functional First Person View quadcopter. The new v1.1 updates the 3mm carbon fiber unibody to give it maximum strength. The arms have more carbon and smaller holes giving them extra strength. Also the point where the arms meet the body has been significantly reinforced. The new v1.1 design can handle the harsh impacts a high speed 250 racer takes.

The QAV250 Carbon Fiber is designed to support a 3s LiPo battery when using the new RX2204-14 2300Kv motors, these small motors offer a good level of thrust while maintaining the lowest weight possible. Made from carbon fiber the QAV250 is not only lightweight but offers great crash resistance which comes from the main frame board being made in one complete part including the arms, this is know as the Unibody. There are landing legs which can be installed on the arms if required. The motor mounting points have been cut into the frame arms to allow a number of motor options to fit, each arm has an additional few mm’s or material which will allow the motors to be protected from knocks and bumps.

The integrated power distribution board will allow easy connection and configuration of the electronics for the ESC’s and the First Person View system. There are two LED boards for visual navigation which assist with orientation of the craft when not using with FPV equipment, these are white and red in colour. The flight controller cover board has cutouts for SMA connectors and adapters used with FPV equipment..

The airframe of the QAV250 carbon edition is only 129 grams, this includes landing legs, LED’s and power boards. The recommended battery for the QAV250 is a 3s lipo with the maximum dimensions of 70 x 32 x 22 mm’s with a 35 C rating. The recommended all up weight on the QAV250 for take-off is 500 grams.

Cameras supported on the QAV250 are 32mm board cameras and other small cased cameras like the FatShark 700TVL WDR CMOS camera. The Mobius and GoPro cameras are also supported on the QAV250 systems.

The QAV250 Mini FPV Quadcopter Carbon Fiber Edition comes supplied with:

 

The QAV250 build manual can be found here.

Reviews

Customer Reviews 2 item(s)

Rolls Royce Mini Quad
I build multirotors professionally and I've literally built hundreds of them from 180 Mini Quads right through to large Octocopters carrying big SLR's.

So I get to build many different frames and I can say that having seen cheap FPV racing frames that inevitably fail, this is the Rolls Royce in 250 size. The Lumenier QAV250 carbon frame was my choice for personal FPV racing use. Buy this and you can't go wrong. If I could, I'd give it more than five stars.
Your Rating
Review by Roy / (Posted on 06/05/2015)
Worth the extra for a good quality product
Excellent service from BYOD, and the price is excellent too, cheaper than importing! This CF frame is really high quality, my first Lumenier build in fact and it wont be the last. I've built a couple of TBS quads, but these just seem to come together in minutes and feel so well built once complete. The CF is very strong and well worth the money.
Your Rating
Review by JAMES / (Posted on 11/04/2015)

Customer Reviews 2 item(s)

Rolls Royce Mini Quad
I build multirotors professionally and I've literally built hundreds of them from 180 Mini Quads right through to large Octocopters carrying big SLR's.

So I get to build many different frames and I can say that having seen cheap FPV racing frames that inevitably fail, this is the Rolls Royce in 250 size. The Lumenier QAV250 carbon frame was my choice for personal FPV racing use. Buy this and you can't go wrong. If I could, I'd give it more than five stars.
Your Rating
Review by Roy / (Posted on 06/05/2015)
Worth the extra for a good quality product
Excellent service from BYOD, and the price is excellent too, cheaper than importing! This CF frame is really high quality, my first Lumenier build in fact and it wont be the last. I've built a couple of TBS quads, but these just seem to come together in minutes and feel so well built once complete. The CF is very strong and well worth the money.
Your Rating
Review by JAMES / (Posted on 11/04/2015)

Write Your Own Review

Only registered users can write reviews. Please, log in or register