Lumenier QAV-R LED Distribution Board

Excl. VAT: £3.50 Incl. VAT: £4.20

Availability: In Stock

In Stock
Excl. VAT: £3.50 Incl. VAT: £4.20
We Accept: Visa Paypal Amex Master Card

The Lumenier QAV-R LED Distribution Board is a component of the Lumenier LED Lighting system, this LED distribution board bolts onto the bottom of the QAV-R raceblade airframe series and distributes a 5v power supply and the needed signal to 4 Arm LED boards (sold separately).

The LED Distribution Board has 1 input (ground, 5V, Signal) and 4 arm LED pads (ground, 5V, signal in, signal out). The LED distribution board also provides one additional set of pads as output to add additional LED boards (any RGB LED board that is running on 5V and uses the typical RGB LED signal). The LED distribution board comes with the needed screws to bold the board to the underside of the QAV-R airframe series. We recommend that you cover the solder pads with insulation such as electrical tape or liquid electrical tape.

The other products in the the Lumenier LED Lighting system, Lumenier Multi-functional RGB LED Tail Light Board and Lumenier Digital RGB Arm LED Board


  • Length: 54mm

  • Width: 45mm

  • Weight: 4g

  • 2mm thick PCB

  • Easily distribute power and signal to digital RBG LEDs


  • 1 x The Lumenier QAV-R LED Power Distribution X Bottom Brace

  • 1 x 1 x 3 Pin Header

  • 1 x 13cm Male to Male servo cable


Write Your Own Review

Only registered users can write reviews. Please, log in or register