Lumenier MICRO LUX F4 Flight Controller

Excl. VAT: £29.15 Incl. VAT: £34.98

Availability: In Stock

In Stock
Excl. VAT: £29.15 Incl. VAT: £34.98
We Accept: Visa Paypal Amex Master Card

The Lumenier micro LUX F4 flight controller brings the incredible power and performance to the micro brushless world. The Lumerier micro LUX F4 uses a powerful F4 processor along with top of the line hardware. Now you can get all the performance from a F4 based flight controller in a micro size! This flight controller uses 20x20mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The micro LUX comes with BetaFlight pre-installed.

The Lumenier micro LUX is available as a stand-alone MICRO F4 Flight Controller or with an included 8CH SBUS FrSky compatible receiver. The micro LUX supports both SBUS and PPM inputs as well as DSM/DSMX receivers with both 5v and 3.3v support.

The micro LUX features a direct plug and play capability with the Lumenier Mini BLHeli_S 10A 4-in-1 OPTO ESC with a simple ESC signal wire jumper.  If you need more power, pair this flight controller with 2x of the Lumenier BLHeli_S 20A 2-in-1 OPTO ESCs (20x20mm)..


Software/Hardware Features

  • 2-4S Direct Lipo input support (5-16v)

  • Onboard 5v/2A and 3.3v/0.2A regulators

  • SBUS and PPM support

  • RGB LED dedicated pad and support

  • 3x UART Ports

  • Betaflight support (Supports new DSHOT protocol)

  • BLHeli passthrough flashing supported by hardware


  • STM32F405 (1MB flash) 32-bit processor

  • ICM-20608-G SPI Gyro/Accelerometer

  • High quality 1.6mm PCB

  • Micro USB connector for programming

  • Dimensions: 27 x 27 x 6mm (includes USB in height)

  • Mounting Holes: 20mm square to center of holes 

  • Weight: 4g


  • 1x Lumenier MICRO Lux Flight Controller

  • 2x Pin Headers (3x1)

  • 8x Anti-Vibration Mounting Rings

  • 2x ESC Input cables



Write Your Own Review

Only registered users can write reviews. Please, log in or register