Lumenier 12 Amp ESC with SimonK Firmware (N-FET) Build Your Own Drone

Home /
Lumenier 12 Amp ESC with SimonK Firmware (N-FET)

Description

Lumenier 12 Amp ESC with SimonK Firmware N-FET

The

Lumenier 12 Amp ESC with SimonK Firmware is a perfect ESC to use with Mini FPV Quadcopters and Hexacopters, the small foot print of these ESC's make them the ideal choice for use on either the QAV250 G10 V2 or the QAV250 Mini FPV Quadcopter Carbon Fiber Edition. The ESC's only weigh 10 grams and with the small profile of just 31 x 18 x 7mm's they can be secured without taking up valueble space on small airframes.

An ESC has either P-channel and N-channel FETs mixed or N-channel FETs only. The ESCs which use only N-channel FETs have the advantage of lower resistance, less losses and hence more efficiency

Features:

Max continuous load: 11 amps
Burst Current: 16A for 10sec
N-Fet Only with BEC flashed with bs_nfet.hex
BEC: 5v @ 1amp max
Lipo Cells: 2 to 3 cells
Cables are fitted with female 2mm bullet connectors
Weight: 10g
15cm signal wire / 5v power
5cm motor wires (including 2mm bullet connector)
70cm ESC power wires

Reviews

Customer Reviews 1 item(s)

Very good overall

I used these on a QAV250 build. They work great out of the box.
They come with bullets by default but I cut mine as I solder them directly to the motor. They are slightly longer than I wanted but it is fine for current build.I am curious if I can flash them with BLHeli if that's possible. Overall I'm very satisfied with them and BYOD team!