ImmersionRC Vortex 250 PRO ARF 350mW UMMAGAWD Edition With Zipper Case

Excl. VAT: £416.65 Incl. VAT: £499.98

Availability: Pre Order

Pre-Order
Excl. VAT: £416.65 Incl. VAT: £499.98
We Accept: Visa Paypal Amex Master Card
Description

ImmersionRC Vortex 250 PRO ARF 350mW UMMAGAWD Edition with Zipper Case

The ImmersionRC Vortex 250 PRO ARF 350mW UMMAGAWD edition is supplied with a zipper case, and is an up rated 

first person view FPV racing system. The ImmersionRC Ummagawd mini racing drone is based on the ImmersionRC Vortex 250 Pro, the Ummagawd mini racing drone features the ImmersionRC Vortex 250 Pro Race Kit Stage 1 stage as standard and is supplied with Lumenier RX2206-11 2350Kv brushless motors & quad propellers. This 250 sized mini-quad frame is the latest design with fixed arms, and builds on the success of their first racing drone the ImmersionRC Vortex 285 ARTF Mini Racing Quad.

The ImmersionRC Vortex 250 Pro Ummagawd edition has an integrated flight controller, with a 3 axis Gyro, 3 axis accelerometer, and barometer pre-programmed with a custom CleanFlight code; this means that the Vortex flight controller is future-proof through downloadable updates. The PIDs (tuning of the systems performance) are adjusted on-screen, this is a very easy to use menu, and being driven directly from the R/C Tx there is no need for a laptop at the field, no more dip-switches to flip or adjust. The Fusion FC Board installed in the Vortex 250 Pro is a "Gen 2" and uses the latest F3 processor, this allows the user to take advantage of faster processing times and the latest "black box" feature. The black box feature helps the pilot with Pro Tune as the filght data is logged onboard to be looked at after the flight is finished.

The ImmersionRC Vortex 250 Pro Ummagawd edition has a direct high-speed interface to a full-graphic OSD system, with USB port on the back of the Vortex 250 Pro quad, this is used for programming and updates. The pre-installed NexWaveRF 5.8GHz Race Band video transmitter, with 40 channel support, ensures compatibility with any 5.8 GHz A/V Rx on the market. ImmersionRC’s exclusive RaceBand allows for up to 8 pilots to fly together. This makes the ImmersionRC Vortex 250 Pro Ummagawd edition a very flexible system which should work with any other systems you already have. The video transmitter has "dynamic power control", this allows the Vortex to change the power output automatically when the quad is disarmed the video transmitter power is lowered, when the motors start the video transmitter increases the power to full for the best video link. Please check that you are allowed to use the installed transmitter in your country.

The flexible Vortex camera mounts supports both a flight cam, and a HD camera such as a GoPro, a GoPro mount is included in the box. The 600TVL CCD flight camera is an equivalent to the HS177 camera and gives the pilot a clear image to allow for great detail at high speeds. The flight camera is protected from impacts as it is mounted inside the frame on a vibration-dampened carbon-fiber plate. The ImmersionRC Vortex 250 Pro Ummagawd edition flight camera is mounted on an adjustable bracket which allows the camera to be tilted to ensure a good forward view during high-speed racing.

The powerful 3A switching regulator built in to the Vortex allows you to add any HD cam (GoPro included), this will take its power direct from the flight pack, allowing the unnecessary camera batteries to be left at home and reducing the overall weight of the system. 

The Vortex includes an industry-first; you can tune the flight parameters from Pro-Racers right in the box. Just select the racer, prop size, HD camera choice, and the Vortex OSD will setup the flight controller for you.

The Vortex has been in testing and some of the biggest names in FPV Quad Racing have tweaked it for peak performance. A set of 12 24-bit RGB LEDs sit on the tail of the Vortex, sandwiched safely between the upper, and lower frame plates. These LEDs are controlled by a dedicated 32-bit ARM processor, this means that you program the LEDs to show something as mundane as the pilot’s favourite color, or just about anything else which is released in future updates of the user-upgradable firmware.


All you need to flight is in the box, just add a compatible R/C Rx (EzUHF preferred of course), a battery, and go fly, everything else is included, from the SpiroNET Tx antenna to the props. 

Specifications:

  • Weight: ~415g without battery, or HD camera

  • Power Requirements: 3s-4s LiPo (typical)

  • ESCs: Full Custom, 20A RotorSENSE OneShot125 (22 Amp peak)

  • Flight Camera: FatShark 600TVL CCD (std), FatShark 700TVL CMOS, and 900TVL CCD optional

  • HD Camera: GoPro Hero, Hero 3/4  (Optional power from onboard BEC), Mobius, Runcam

  • Receiver Compatibility: CPPM Input, with S-Bus, and Spektrum Satellite converter cables optional

  • Flight Time: Highly dependent upon battery, and flying style


Included in the box

  • 1x Vortex 250 Pro Race Quad, Fully assembled and tested

  • 1x Vortex 250 Pro Zipper case, fits 250 and 270 versions (5" or 6" props), with two zipper pockets

  • 2x ImmersionRC Branded battery straps (Installed)

  • 1x SpiroNET Omni 5.8GHz antenna

  • 1x PPM Interface Cable

  • 1x Spektrum(tm) Interface Cable

  • 1x SBus Interface Cable

  • 8x OEM HQ 5040 4-Blade GFK Props

  • Zipper case, with protective outer sleeve.

Reviews

Customer Reviews 2 item(s)

beast far better than the vortex 250
I have both now umg 250 pro and the regular 250 pro think they are both excellent quads they might look quite similar but the way they fly is totally diffrent umg is mega fast as for build your own drone they are fantastic friendly helpful fast to respond to questions willing to spend time chatting away they are very passionate about the hobby buy a mile the best company I have dealt with in this hobby and I have used them all
Your Rating
Review by millband / (Posted on 25/07/2016)
Very pleased
Like the F1 car version of FPV racing quads I can't fault it in any way,
Excellent service from the BYOD team I will always shop there from now on for all my drone needs and will recommend and have recommended them to all my quad friends ....
Your Rating
Review by PETE / (Posted on 12/07/2016)

Customer Reviews 2 item(s)

beast far better than the vortex 250
I have both now umg 250 pro and the regular 250 pro think they are both excellent quads they might look quite similar but the way they fly is totally diffrent umg is mega fast as for build your own drone they are fantastic friendly helpful fast to respond to questions willing to spend time chatting away they are very passionate about the hobby buy a mile the best company I have dealt with in this hobby and I have used them all
Your Rating
Review by millband / (Posted on 25/07/2016)
Very pleased
Like the F1 car version of FPV racing quads I can't fault it in any way,
Excellent service from the BYOD team I will always shop there from now on for all my drone needs and will recommend and have recommended them to all my quad friends ....
Your Rating
Review by PETE / (Posted on 12/07/2016)

Write Your Own Review

Only registered users can write reviews. Please, log in or register