ImmersionRC Uno V2 5800 5.8 GHz A/V Receiver

Excl. VAT: £42.90 Incl. VAT: £51.48

Availability: Pre Order

Pre-Order
Excl. VAT: £42.90 Incl. VAT: £51.48
We Accept: Visa Paypal Amex Master Card
Description

ImmersionRC 5.8GHz V2 Uno 5800 A/V Receiver

The ImmersionRC V2 Uno has now been replaced with the ImmersionRC Uno 5800 V4 5.8 GHz A/V Receiver this page is for reference only.


The ImmersionRC Uno 5.8 GHz V2 Uno 5800 is designed for plug and play integration with the Ground Station system via a single-cable for First Person View applications.

The ImmersionRC Uno receiver can pass the required power, audio, video, and data with a bi-directional data link cable which is through a single Mini-Din connector to the Ground Station. The Uno V2 is supplied with a traditional 3.5mm jack and DC power jacks for compatibility with older systems. (The mini-din connector will be available separately. The Immersion RC Uno V2 includes 1 30cm a/v cable with female RCA plugs and 1 2.1mm barrel connector power lead with bare wires to allow integration across many systems)

The data link allows the Ground Station to know, the received signal strength (RSSI) in real time, allowing it to warn the pilot of low-signal conditions this will help keep a GPS-tracked antenna mount pointing in the correct position of the aircraft. This same data link allows the Ground Station to control various aspects of the receiver. When an antenna is mounted directly on to the antenna’s RF output it will eliminates cable loses, however it can cause difficulty gaining access to the controls directly on the receiver, however the UNO’s data link channel selection can be controlled on the ground station.

The ImmersionRC Uno V2 Uno 5800 has a > -90dB this means that the Uno is very sensitive when paired with an appropriate antenna, it will give you many miles/km of range. If you add an antenna tracker, and a higher gain antenna this range is increased significantly. Like every ImmersionRC product the UNO V2 5.8 Ghz receiver has been engineered from an First Person View pilots perspective, it will warn you when the receiver battery runs low, with an automatic, or user-settable low voltage threshold.

The increased performance of the Nexwave modules, combined with the ImmersionRC SpiroNet 5.8 GHz Circular Polarized Antennas and ImmersionRC SpiroNet 5.8 GHz Patch Antenna,will make FPV using ImmersionRC 5.8 GHz 25 mW Transmitter systems much more viable. The ImmersionRC Uno V2 receiver is Compatible with the existing Fat Shark and ImmersionRC 5.8GHz equipment. The Uno has extensive filtering of UHF and 2.4 GHz emissions in close proximity to the receiver (important for goggle users). The Uno V2 will work on Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz and a voltage of 6-16 volts, the Uno V2 can be powered from a 3 or 4s lipo battery to keep the system easy to transport.

Reviews

Customer Reviews 1 item(s)

Quality products! Fast delivery!
Though it's only a 25mW setup, I really think the IRC products are of such good quality, that you can still achieve an impressive video link!

ImmersionRC 5.8 GHz 25mW Transmitter
ImmersionRC SpiroNet 5.8 GHz Circular Polarized Antennas
GoPro Hero 3 USB Camera Cable ImmersionRC Fat Shark
GoPro Hero3 Black Editon

See for yourself!
https://www.youtube.com/watch?v=2CiNdxIQxzs

Shipping was fast to Germany! I am impressed!
Your Rating
Review by JulianGoesPro / (Posted on 08/05/2015)

Customer Reviews 1 item(s)

Quality products! Fast delivery!
Though it's only a 25mW setup, I really think the IRC products are of such good quality, that you can still achieve an impressive video link!

ImmersionRC 5.8 GHz 25mW Transmitter
ImmersionRC SpiroNet 5.8 GHz Circular Polarized Antennas
GoPro Hero 3 USB Camera Cable ImmersionRC Fat Shark
GoPro Hero3 Black Editon

See for yourself!
https://www.youtube.com/watch?v=2CiNdxIQxzs

Shipping was fast to Germany! I am impressed!
Your Rating
Review by JulianGoesPro / (Posted on 08/05/2015)

Write Your Own Review

Only registered users can write reviews. Please, log in or register