ImmersionRC Duo V4 5800 5.8 GHz A/V Diversity Receiver

Excl. VAT: £83.32 Incl. VAT: £99.98

Availability: Pre Order

Excl. VAT: £83.32 Incl. VAT: £99.98
We Accept: Visa Paypal Amex Master Card

ImmersionRC 5.8GHz V4 Duo 5800 A/V Diversity Receiver

The ImmersionRC Duo 5.8 GHz V4 has now been replaced with the ImmersionRC Duo5800 V4.1 Race Edition 5.8 GHz A/V Receiver This page is for reference only.

The ImmersionRC 5.8 GHz V4 Duo 5800 Diversity Receiver has been designed for plug and play integration with the Ground Station system via a single-cable for First Person View applications.

The ImmersionRC Duo receiver can pass the required power, audio, video, and data with a bi-directional data link cable which is through a single Mini-Din connector to the Ground Station. The Duo V4 is supplied with a traditional 3.5mm jack and DC power jacks for compatibility with older systems. (The mini-din connector will be available separately. The Immersion RC Duo V4 includes 1 30cm a/v cable with female RCA plugs and 1 2.1mm barrel connector power lead with bare wires to allow integration across many systems)

The data link allows the Ground Station to know, the received signal strength (RSSI) in real time, allowing it to warn the pilot of low-signal conditions this will help keep a GPS-tracked antenna mount pointing in the correct position of the aircraft. This same data link allows the Ground Station to control various aspects of the receiver. When an antenna is mounted directly on to the antenna’s RF output it will eliminates cable loses, however it can cause difficulty gaining access to the controls directly on the receiver, however the DUO’s data link channel selection can be controlled on the ground station.

The ImmersionRC Duo V4 5800 has a > -90dB this means that the V4 is very sensitive when paired with an appropriate antennas, it will give you many miles/km of range. If you add an antenna tracker, and a higher gain antenna this range is increased significantly. Like every Immersion RC product the Duo V4 5.8 Ghz receiver has been engineered from an First Person View pilots perspective, it will warn you when the receiver battery runs low, with an automatic, or user-settable low voltage threshold.

The increased performance of the Nexwave modules, combined with the ImmersionRC SpiroNet 5.8 GHz Circular Polarized Antennas and ImmersionRC SpiroNet 5.8 GHz Patch Antenna , will make FPV using ImmersionRC 5.8 GHz 25 mW Transmitter systems much more viable. The Immersion RC Uno V4 receiver is Compatible with the existing Fat Shark and Immersion RC 5.8GHz equipment. The Uno has extensive filtering of UHF and 2.4 GHz emissions in close proximity to the receiver (important for goggle users). The Duo V4 will work on Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz and a voltage of 6-16 volts, the Duo V3 can be powered from a 3 or 4s lipo battery to keep the system easy to transport.


Supplied with:


2 x antennas (3dBi 5.8Ghz omni-directional), SMA male connector


2 x 30cm RCA AV cables (3.5mm 4-POL to 3xCinch)


1 x 1m DC Power cable (open ends)


Write Your Own Review

Only registered users can write reviews. Please, log in or register