ImmersionRC 600mW RaceBand 5.8 GHz Long Range Transmitter
We have now replaced the ImmersionRC 600mW product with the Lumenier TX5GA 5.8GHz Adjustable RF Power (25-600mw) FPV Video Transmitter. This allows you to select the power output needed, UK legal 25mW for local flights and where allowed the higher powered settings of 200mW and 600mW for longer range flights. Please check your local laws for the power output allowed from an aircraft. The Lumenier is compatible & will work with all the parts the ImmersionRC video transmitters parts listed below for the ImmersionRC 600mW RaceBand 5.8 GHz Long Range Transmitter.
The ImmersionRC 600mW RaceBand 5.8 GHz transmitters have 15 channels and been designed for First Person View applications and FPV Racing; the ImmersionRC 600mW Race Band 5.8GHz transmitters are small, lightweight and are supplied with a 3dBi 5.8 Ghz Omni-directional antenna (SMA connector) & cables needed to link to both the battery, video and audio from cameras into the transmitter.
If you are looking for a longer range video reception you can add one of the following parts to your FPV Video goggles or screen receiver, ImmersionRC Spiro Net 5.8GHz Circular Polarized antennas and the ImmersionRC SpiroNet 5.8 GHz Patch Antenna, both of these will increase the video range over the standard 3dBi 5.8 Ghz Omni-directional antennas.The ImmersionRC 600 mW 5.8 GHz will operate on a battery voltage in the range of 6-25 volts, which means that you will be able to power the transmitter directly from a 3s to 6s battery without any additional voltage converters, on board the transmitter there is a quiet switching regulator, this provides power supply at 5 volts to use for powering cameras that need a 5 volt feed (including the Fat Shark PilotHD V2 720p HD FPV Camera.
These 5.8 GHz ImmersionRC video Transmitters will work with the Fat Shark goggles like the Attitude V3 goggles and the ImmersionRC Uno or ImmersionRC Duo receiver’s. The ImmersionRC transmitter operates on the following frequencies:
ImmersionRC / Fatshark: 5740, 5760, 5780, 5800, 5820, 5840, 5860 MHz / Raceband: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917MHz.
The audio channels allows an easy way to use a telemetry downlink for the more demanding user.The use of 5.8 GHz video transmitters for First Person View flights means that there is no interference with radio controllers operating on the 2.4 Ghz band. Please note that the 600 mW Immersion RC video Transmitter can't be used in all regions license free, please check with your local radio authority to ensure you comply with local laws throughout Europe and other countries on aircraft transmissions levels before ordering this product, a license might be required in your location to operate this equipment legally both on the ground and in the air.
If you need to use a lower powered system due to restrictions in your country you can use the Immersion RC 5.8 GHz 25 mW Transmitter.
Please Note: Never power up a transmitter without the antenna attached. This will damage the transmitter which is not covered by warranty. Additional cables might be required to connect a camera if they are not supplied with the camera you wish to use.
1 x 3dBi 5.8Ghz omni-directional antenna (SMA connector)
1 x Video cable (20cm 5-pin Molex-SL terminated in wire ends)
1 x DC power cable (24cm 2-pin Molex-SL terminated in BEC-style connector)