DJI Naza M V2 GPS Combo + F550 E300 ARTF + H3-3D Zenmuse + iOSD mini + 2.4 Ghz BT Datalink

As low as: Excl. VAT: £200.82 Incl. VAT: £240.98

Price as configured: Excl. VAT: £0.00 Incl. VAT: £0.00

Availability: Out of stock

We Accept: Visa Paypal Amex Master Card

This kit has now been replaced with the DJI F550 E305 Flame Wheel ARTF Kit V2 + DJI Naza M V2 GPS Combo + H3-3D Zenmuse + iOSD mini + 2.4 Ghz BT Datalink + 5.8 Ghz Video Link This page is now for reference only.

The Naza M V2 GPS & F550 E300 Flame Wheel ARTF Kit from DJI is their next exciting product to the market, it utilises the latest technology from the E300 Tuned Propulsion system with the Naza M V2 GPS flight controller. This package includes the latest F550 E300 Flame Wheel ARTF QuadCopter kit supplied with the landing legs needed to install a Zenmuse gimbal. The New E300 Tuned Propulsion system is the first power solution of its kind for multi-rotor use, the higher thrust to weight ratio increases the reliability, stability and agility of flight through enhanced aerodynamics and efficiency from the motor and propeller combination.

The DJI Naza M V2 main controller hardware structure has been optimized, the expandability and performance of the flight control system has been enhanced further with new attitude stabilization algorithms. The E300 Tuned Propulsion system has added to these improvements to provide better flight performance and manoeuvrability, the new level of flight control performance provides better flight control, flights are smoother and take-offs are easier. The Naza M V2 has automatic course deviation compensation, this reduces the effects of magnetic disturbance and interference around the compass, there is a warning for detection of magnetic disturbance from the Naza LED. The IMU advanced calibration; error identification and warning helps to reduce the impact of sensor errors in flight so increasing the overall performance of the system.

The GPS unit added to the Naza M V2 will see great position holding and RTL (Return To Launch) features for additional safety. The Naza M V2 with GPS also have IOC (Intelligent Orientation Control) function to help new and experienced pilots gain the most from the systems with easy orientation assistance while flying at greater distances.

Included in the

Naza M V2 GPS combo + F550 E300 ARTF + H3-3D Zenmuse + iOSD mini + 2.4 Ghz BT Datalink:

Please note some soldering and construction is needed on the F550 E300 Flame Wheel ARTF Kit.

For the latest updates, firmware and manuals please visit:

DJI Innovations Naza Support Pages.

DJI Zenmuse H3-3D V1.1 Brushless Gimbal With GCU.

The DJI Zenmuse H3-3D V1.1 Brushless Gimbal is a 3 axis brushless gimbal, which has a high precision, high stability and lightweight chassis with plug and play features; it is widely used in film and television productions and advertising aerial photography. The Zenmuse H3-3D Gimbal is designed for the GoPro Hero3 and will stabilize and control the GoPro camera precisely within the 3 axis of control for outstanding video stright from the camera. The precision of control angle is within the range of ±0.08°, so the photos or video output will be of the highest quality in fast forward flight or a holding position. The H3-3D gimbal has its own independent high-precision Inertial Measurement Unit (IMU) which offers precise attitude information and more accurate control.

The DJI Zenmuse H3-3D gimbal requires no additional manual adjustments, you only need to check and adjust the C of G. and parameters in the software for use with the DJI Naza M V2 GPS Flight Controller, the installation process is extremely simple, you only need to install the GCU for communication with the Naza M V2 Can network.

The H3-3D gimbal has a video output pickup from the GoPro Hero3’s USB connector and with the use of a video transmission system (video downlink required) you will be able to view the image seen by the GoPro in real time. DJI are looking to add the use of remote start/stop shooting etc of the GoPro Hero3 in future firmware upgrades.

The mechanical design, weight and power supply to the gimbal is matched to the Naza M V2 perfectly. The H3-3D can have the tilt adjusted from a transmitter, this can be used to give the pitch (tilt) control function to the gimbal, the other 2 axis's are not user controlled. No additional receiver channels are needed as it uses the additional MC channels for operation on the Pan / Roll axis. The aluminum alloy material and mechanical design means that the gimbal is extremely light weight (total approx weight 330g with the GoPro Hero3 included). The structural design of the aluminum frame guarantees the strength of the gimbal and gives it a robust feel and function. 

DJI F550 E300 Flame Wheel Quadcopter ARTF Kit

The DJI F550 E300 Flame Wheel ARTF kits utilise the latest technology from the E300 Tuned Propulsion system, they can be used with the DJI A2 M, DJI Wookong MNaza M V2 or the DJI Naza M Lite autopilot systems to achieve hovering, cruising or other flight elements. The DJI F550 E300 can be used for aerial photography, entertainment, First Person View / FPV flights and other aero modelling activities.

The E300 Tuned Propulsion system are the first power solution designed for multi-rotor use, the higher thrust to weight ratio from the E300 system increases the reliability, stability and agility of flight through enhanced aerodynamics and efficiency from the motor and propeller combination. The E300 Tuned Propulsion system uses 9.4 x 4.3 propellers (DJI E300 Self Tightening Propellers Grey) which deliver an average of 20-25% improvement over the 8 x 4.5 propellers without the need for an increase in motor size. The higher lift generated from the new profile propeller means that payloads can be increased without the need to upgrade the system.

The ESC’s for the E300 Tuned Propulsion system have been improved with a new efficient and quick response algorithm to take full advantage of the new motor and propeller combination. All of the improvements contribute towards extra maneuverability and stability in windy conditions or during descent of the aircraft. The propellers are balanced dynamically to reduce “jello” and rolling shutter issues seen on non-balanced propellers when using cameras in the air. The E300 ESC’s were designed with a coaxial cable to lower the impact of electromagnetic interference to other systems while in flight.

The DJI F550 Flame Wheel frames are built from very strong materials, the arms are made from the ultra-strong PA66+30GF, this provides better resistance to damage on hard landings, while the main frame plates use a high strength compound PCB material, which makes wiring of E300 ESC’s, battery easier, quicker and safe on the lower of the two frame plates which is also the power distribution board. The overall frame design provides enough space when assemble to fit an autopilot systems between the top and bottom plates of the F550 Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight, other coloured arms in black are also available.

The F550 Flame Wheel frames are very easy to build and are held together by a set of shouldered bolts through the top plate and bottom plate, the bolts pass through the predrilled holes in the top and bottom frame plates of the F550 Flame Wheel into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F550 Flame Wheel frame is very solid.


The DJI iOSD Mini delivers the Naza M GPS on screen display information, this was a long awaited addition to the Naza M V2 GPS this is a great addition for the FPV / First person View flyer who needs accurate flight data information in the shortest possible time, the DJI iOSD Mini will give you the best in FPV flight experience and data in real time. The DJI iOSD mini displays the vital information overlayed on to the video images seen from the onboard camera, no more guessing at the battery voltage level, this is clearly dispayed along with distance and height from your take-off point. There is a clear home point location displayed on your screen to make finding your way home easy, you just follow the on sceen "diamond" back to the home point which is set at take-off when there are enough GPS satellites found.  

  • Voltage: 6V

  • Working Temperature: -20 - +60c

  • Video Input/Output Mode: PAL / NTSC (automatically recognize)

  • Weight: 14g

  • Working Current (Typical Value): 180mA @ 6V

DJI iPad Ground Station + 2.4 GHz Bluetooth Data Link

The DJI iPad Ground Control Station (GS) App is for the iPad 3 / 4 and Mini offers full support for all of DJI multi-rotor flight controllers, the DJI iPad can access the parameters to allow the user to change them with ease or set waypoints wirelessly from an iPad. These additional features from DJI iPad Ground Station will give both the hobby and aerial photography professionals another tool to conduct fun or professional flights with a real time mapping and flight data clearly displayed to monitor the multi rotors progression and key flight information.

The DJI iPad Ground Station comes with the click & go function, 16 waypoints are included for the Naza M V2 GPS, these are enabled after a firmare upgrade to flight controller. 



    RF Data Rate: 1536kbps

  • Indoor/Urban Rangenge = 350m (FCC)= 200m (CE)

  • Outdoor/RF Line-of-Sight Range = 2km (FCC)= 1.1km (CE)

  • Transmit Power 160mW

  • Receiver Sensitivity (1%PER) -94dBm

  • Power Consumption Ground: = 2.2W / Air: = 2W

  • Frequency Band 2.4GHz (2400MHz ~2483MHz)

  • Serial Data Rate 115200 bps

  • Antenna SMA

  • Operating Temperature -10°C ~ +60°C

  • Operating Humidity 0 ~ 95%

  • Size (No Antenna) Ground: 73mm x 47.8mm x 17.1mm / Air:49.8mm x 36.4mm x 11.4mm

  • Weight (With Antenna) Ground:92g / Air: 31g

  • Power requirement, Supply Voltage Ground:3S-6S Battery / Air: 6V

  • Transmit Current 176mA

  • Receive Current 325mA

  • FCC (USA) Yes

  • CE (UK & EU) Yes


Write Your Own Review

Only registered users can write reviews. Please, log in or register