DJI F550 Flame Wheel ARTF Hexacopter Kit

Excl. VAT: £184.20 Incl. VAT: £221.04

Availability: Pre Order

Pre-Order
Excl. VAT: £184.20 Incl. VAT: £221.04
We Accept: Visa Paypal Amex Master Card
Description

DJI F550 Flame Wheel Hexacopter ARTF.

This product has been replced with the DJI F550 E300 Flame Wheel Kit This page is for reference only.

The F550 Flame Wheel can be used with either the DJI WKM or Naza M V2 autopilot systems to achieve hovering, cruising, even rolling and other flight elements. It can be used for FPV, entertainment, aerial photography and other aero modelling activities.

 

The DJI Innovations F550 flame wheel multi rotor frame kit comes with:

The DJI Flame Wheel F550 frames are built from very strong materials, the arms are made from the ultra strong PA66+30GF material which provides better resistance to damage on hard landings, while the main frame plates use a high strength compound PCB material, which makes wiring of ESCs and battery easier and safe on the lower of the two frame plates which is also the power distribution board. The overall frame design provides enough space when assemble to fit an autopilot systems between the top and bottom plates of the Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight, other coloured arms in black are available.

 

These frames are very easy to build and are held together by a set of shouldered bolts, the bolts pass through the predrilled holes in the top and bottom frame plates of the F550 Flame wheel into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F550 Flame Wheel frame is very solid, and are able to put up with a great deal of use and abuse!

 

Please note: this is the frame, motor, prop's & ESC only kit, if you are looking to add a NAZA flight controller to this setup please see the ARTF DJI NAZA F550 HexaCopter Kit.

 

F550 User Manual v1.0

 
ModelF550 Flame Wheel
Frame Weight478g
Diagonal Wheelbase550mm
Takeoff Weight1200g ~ 2400g
Recommended Propeller10 x 4.5in ; 8 x 4.5in
Recommended Battery3S~4S LiPo
Recommended Motor22 x 12mm (Stator size)
Recommended ESC30A OPTO
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register