DJI F450 Flame Wheel Multi Rotor Quadcopter ARTF Kit

Excl. VAT: £111.70 Incl. VAT: £134.04

Availability: Pre Order

Excl. VAT: £111.70 Incl. VAT: £134.04
We Accept: Visa Paypal Amex Master Card

DJI F450 Flame Wheel Multi Rotor Quadcopter ARTF Kit

This product has been replced with the DJI F450 E305 Flame Wheel ARTF V2 This page is now for reference only.

The DJI F450 Flame Wheel can be used with either the DJI Wookong WKM or Naza M V2 autopilot systems to achieve hovering, cruising, even rolling and other flight elements. It can be used for aerial photography, entertainment, FPV flights and other aero modelling activities.

The F450 Flame Wheel multi rotor QuadCopter frame kit comes with:


The DJI F450 Flame Wheel frames are built from very strong materials, the arms are made from the ultra strong PA66+30GF material which provides better resistance to damage on hard landings, while the main frame plates use a high strength compound PCB material, which makes wiring of ESCs and battery easier and safe on the lower of the two frame plates which is also the power distribution board. The overall frame design provides enough space when assemble to fit an autopilot systems between the top and bottom plates of the Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight, other coloured arms in black are available.

These frames are very easy to build and are held together by a set of shouldered bolts, the bolts pass through the predrilled holes in the top and bottom frame plates of the F450 Flame Wheel into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F450 Flame Wheel frame is very solid, and are able to put up with a great deal of use or abuse!

Please note: this is the F450 Flame Wheel frame with a set of matched motors, props & ESC's, you will still need to add a flight controller to this setup. please visit the Naza M V2 flight controller page for the flight controller to ad to this kit.


F450 User Manual v1.0: 


ModelF450 Flame Wheel 450
Frame Weight 282g
Diagonal Wheelbase 450mm
Takeoff Weight 800g ~ 1600g
Recommended Propeller10 x 4.5in ; 8 x 4.5in
Recommended Battery3S~4S LiPo
Recommended Motor22 x 15mm or 22 x 12mm
Recommended ESC30A OPTO

Write Your Own Review

Only registered users can write reviews. Please, log in or register