DJI F450 E300 Flame Wheel Kit ARTF

Excl. VAT: £117.50 Incl. VAT: £141.00

Availability: Pre Order

Excl. VAT: £117.50 Incl. VAT: £141.00
We Accept: Visa Paypal Amex Master Card

DJI F450 E300 Flame Wheel Quadcopter ARTF Kit

The DJI F450 E300 Flame Wheel Quadcopter ARTF Kit has now been replaced with the DJI F450 E305 Flame Wheel ARTF Kit V2 This page is now for reference only.

The DJI F450 E300 Flame Wheel ARTF kits utilise the latest technology from the E300 Tuned Propulsion system, they can be used with the DJI A2 M, DJI Wookong M, Naza M V2 or the DJI Naza M Lite autopilot systems to achieve hovering, cruising or other flight elements. The DJI F450 E300 can be used for aerial photography, entertainment, First Person View / FPV flights and other aero modelling activities.

The E300 Tuned Propulsion system are the first power solution designed for multi-rotor use, the higher thrust to weight ratio from the E300 system increases the reliability, stability and agility of flight through enhanced aerodynamics and efficiency from the motor and propeller combination. The E300 Tuned Propulsion system uses 9.4 x 4.3 propellers which deliver an average of 20-25% improvement over the 8 x 4.5 propellers without the need for an increase in motor size. The higher lift generated from the new profile propeller means that payloads can be increased without the need to upgrade the system.

The ESC’s for the E300 Tuned Propulsion system have been improved with a new efficient and quick response algorithm to take full advantage of the new motor and propeller combination. All of the improvements contribute towards extra maneuverability and stability in windy conditions or during descent of the aircraft. The propellers are balanced dynamically to reduce “jello” and rolling shutter issues seen on non-balanced propellers when using cameras in the air. The E300 ESC’s were designed with a coaxial cable to lower the impact of electromagnetic interference to other systems while in flight.

The DJI F450 Flame Wheel frames are built from very strong materials, the arms are made from the ultra-strong PA66+30GF, this provides better resistance to damage on hard landings, while the main frame plates use a high strength compound PCB material, which makes wiring of E300 ESC’s, battery easier, quicker and safe on the lower of the two frame plates which is also the power distribution board. The overall frame design provides enough space when assemble to fit an autopilot systems between the top and bottom plates of the F450 Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight, other coloured arms in black are also available.

The F450 Flame Wheel frames are very easy to build and are held together by a set of shouldered bolts through the top plate and bottom plate, the bolts pass through the predrilled holes in the top and bottom frame plates of the F450 Flame Wheel into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F450 Flame Wheel frame is very solid.


You may also be interested in the following product(s)

Write Your Own Review

Only registered users can write reviews. Please, log in or register