The DJI F450 ARF Kit V5 Flame Wheel uses the latest technology, it comes supplied with the DJI 2312E motors & E Series 430 Lite ESC's. When macthed with any one of the DJI flight controllers, the DJI F450 ARF Kit V5 Flame Wheel kits can achieve automated hovering, cruising or other fun flight applications. The DJI F450 ARF Kit V5 Flame Wheel can also be used for aerial photography, entertainment, First Person View / FPV flights and other aero modelling activities. We recommend using any of the following DJI flight controllers, DJI A3, DJI N3, Naza M V2 or the DJI Naza M Lite V1.1.
The DJI 2312E motors were first seen in the E305 Tuned Propulsion Systems, and were designed specifically for multi-rotor use, the higher thrust to weight ratio given from the E305 2312E motors helps to increases the reliability, stability and agility of DJI F450 ARF. The DJI 2312E motors use the 9.4 x 5.0 propellers, this combination of propellers and motors improves performance and an efficiency of just under 7% over the old E300 motors found in the older F450 ARF Kits.
The DJI E Series 430 Lite ESC’s have been improved with a new efficient and quick response algorithm to take full advantage of the motor and propeller combination. The E305 multi-rotor propulsion system utilizes square-wave drive architecture, providing a smaller, lighter package than a sine-wave ESC. The compact, smaller circuit board is easier and quicker to mount with a customized DJI 32-bit 100 MHz MCU and motor-control algorithm.
All of the improvements seen in the The DJI F450 ARF Kit V5 Flame Wheel, contribute towards extra maneuverability and stability in windy conditions or during descent of the aircraft. The propellers are balanced dynamically to reduce “jello” and rolling shutter issues seen on non-balanced propellers when using cameras in the air.
The DJI F450 Flame Wheel frames are built from very strong materials, the arms are made from the ultra-strong PA66+30GF, this provides better resistance to damage on hard landings, while the main frame plates use a high strength compound PCB material, which makes wiring the E430 lite ESC’s, battery and all your accessories on the lower of the two frame plates quicker, easier and safer, this plate is also the power distribution board. The overall frame design provides enough space when assembled to fit an autopilot system between the top and bottom plates of the F450 V5 Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight.
The F450 Flame Wheel frames are very easy to build and are held together by a set of shouldered bolts through the top plate and bottom plate, the bolts pass through the predrilled holes in the top and bottom frame plates of the F450 Flame Wheel into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F450 Flame Wheel frame is very solid.
2 x Frame Board
4 x Frame Arm
3 x Propeller 9450
4 x Motor 2312E 960KV
4 x 430 Lite 30A ESC