DJI F330 Flame Wheel QuadCopter Frame

Excl. VAT: £22.50 Incl. VAT: £27.00

Availability: Pre Order

Excl. VAT: £22.50 Incl. VAT: £27.00
We Accept: Visa Paypal Amex Master Card

DJI F330 Flame Wheel QuadCopter frame.


Please note that this product has been discontinued, DJI have not replaced the F330 with any other product, this page is for reference only.

The F330 Flame Wheel can be used with the NAZA flight system to achieve hovering, cruising, even rolling and other flight elements. It can be used for entertainment, aerial photography, FPV and other aero modelling activities.


The DJI F330 Flame Wheel frames are built from very strong materials, the arms are made from the ultra strong PA66+30GF material which provides better resistance to damage on hard landings, while the main frame plates use a high strength compound PCB material, which makes wiring of ESCs and battery easier and safe on the lower of the two frame plates which is also the power distribution board. The overall frame design provides enough space when assemble to fit an autopilot systems between the top and bottom plates of the Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight.

These frames are very easy to build and are held together by a set of shouldered bolts, the bolts pass through the predrilled holes in the top and bottom frame plates of the F330 Flame Wheel into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F330 Flame Wheel frame is very solid, and are able to put up with a great deal of use or abuse!


Please note: this is the frame only kit, if you are looking for a complete set of matched motors, props & ESC's please see the ready to go F330 Quadcopter kit ARTF or order your 8" props, DJI motors and 18 Amp ESC's as needed in the DJI section of the store. You will still need to add a flight controller and RC Radio system to this setup. 

F330 User Manual v1.6



F330 Flame Wheel

Frame Weight156g
Diagonal Wheelbase330mm
Takeoff Weight600g ~ 1200g
Recommended Propeller8 x 4.5in
Recommended Battery3S~4S LiPo
Recommended Motor22 x 12mm (Stator size)
Recommended ESC18A OPTO

Write Your Own Review

Only registered users can write reviews. Please, log in or register