DJI E600 Propellers Black

Excl. VAT: £10.00 Incl. VAT: £12.00

Availability: In Stock

In Stock
Excl. VAT: £10.00 Incl. VAT: £12.00
OR
We Accept: Visa Paypal Amex Master Card
Description

DJI E600 Self Tightening Propellers Black 12 x 4.2

These DJI E600 Self Tightening Propellers Black are specially designed to be used with the DJI E600 Tuned Propulsion System, they have a built in nut with threads to allow self tightening while in flight, they require a special spanner to undo them after flight. Please note that these props will only work with the right and left handed threaded motors. Packet Contents: 2 x (12 x 4.2 inch) E600 Tuned Propulsion System propellers: 1 x CCW propeller, 1 CW propeller in Black (Black and Silver caps).

The DJI E600 propellers are dynamically balanced at the factory which removes the jello effect seen on video taken from the camera when airboure, the low inertia and aerodynamic efficiency of the E600 propellers means that you can use higher gain values to deliver a great level of maneuverability & stability from your flight controller.

Reviews

Customer Reviews 2 item(s)

DJI props
Fantastic props using on the E600 motors one more time the guys at BYOD go the extra mile special thanks to Mike
Your Rating
Review by George / (Posted on 30/03/2015)
Excellent options
Recent DJI blades have been incredibly good value for the performance they give. These are just the same.
I am using them with T-Motor MT2216 800kv's. You will need the PA003 + PA004 adapters for the motors.
Please note these do NOT fit E300 motors as they have an internal M5 thread (not the usual DJI M6 thread). Details here: http://www.youtube.com/watch?v=LRhcbURsHqs
As always great service from BYOD too.
Your Rating
Review by DeweyAXD / (Posted on 23/11/2014)

Customer Reviews 2 item(s)

DJI props
Fantastic props using on the E600 motors one more time the guys at BYOD go the extra mile special thanks to Mike
Your Rating
Review by George / (Posted on 30/03/2015)
Excellent options
Recent DJI blades have been incredibly good value for the performance they give. These are just the same.
I am using them with T-Motor MT2216 800kv's. You will need the PA003 + PA004 adapters for the motors.
Please note these do NOT fit E300 motors as they have an internal M5 thread (not the usual DJI M6 thread). Details here: http://www.youtube.com/watch?v=LRhcbURsHqs
As always great service from BYOD too.
Your Rating
Review by DeweyAXD / (Posted on 23/11/2014)

Write Your Own Review

Only registered users can write reviews. Please, log in or register