DJI A2 M Flight Controller & iOSD Mark II
The A2 M Flight controller is the flagship muti-rotor controller from DJI Innovations; in this package the iOSD Mark II is included with the the A2. The DJI A2 uses DJI’s flight controller experience and heritage seen in the other ranges of high-end flight controllers from DJI. The A2 flight controller continues to deliver the latest innovations with the highest specifications for demanding users and demanding flight conditions, however it also innovates beyond the competition in key areas, which DJI hopes will continue to give it the edge over other flight controllers.
The DJI A2 offers a more precise position hold in more extreme environments with the latest generation IMU and an upgraded GPS module, the new GPS module will help maintain a more accurate position and altitude lock even in a semi congested environment, over and above that experienced previously with the Wookong M. The higher accuracy of the GPS is complemented with the enhanced anti-vibration characteristics in the A2 flight controller’s IMU. These improvements come together to deliver the most accurate position hold seen to date from DJI.
A built in 2.4ghz DESST receiver in the DJI A2 greatly simplifies the system installation and improves the link security of the remote control system, the DJI A2 flight controller is compatible to the following receivers, Futaba FASST series (Futaba S-Bus receiver with S-BUS interface), JR/SPEKTRUM receiver with two-way DSM2 satellite interface and the traditional receivers with the DJI DBUS Adapter module.
The flexible and extended capability of the A2 for the pilot comes in the form of twelve output channels, this means that the A2 allows users to greatly extend the uses of this system, with remote parameter adjustment enabled the DJI A2 provides an interface with the assistant software for iOS devices via Blue tooth (Blue tooth 4.0). The parameters can be adjusted at any time on a mobile device, using only an LED indicator with a built-in Bluetooth module, which makes it easier and convenient than needing a laptop to make these adjustments.
The upgraded power management unit (PMU) for the A2 is to allow for greater power consumption needed to operate. The DJI A2 has two power outputs, one for the A2 system and the receiver separately, this allows the PMU to carry out battery voltage monitoring, and provides two CAN Bus interfaces. The dual CAN-Bus system of the A2 system has a dual CAN-Bus design, which means that the system data throughput will be doubled and future expansions and additional auxiliary can be added with ease.
Some of the most advanced features on the DJI A2 are the, Motor test, Power lock when connect assistant software, Inverted Nose-In Return-to-Home, HOME point/instruction and Compass error alarming.
Multiple Control Modes
2-axle Gimbal Supported
Intelligent Orientation Control
Dynamical Systems Protection
PC & Bluetooth Ground Station
External Receiver Supported
9 Types of Supported Multi-rotor
Other DJI Products Supported
Low Voltage Protection
Configure Para Via Bluetooth
4 Configurable Output
For additional information please visit the DJI A2 product page
DJI iOSD Mark II On Screen Display for DJI A2 M.
The iOSD Mark II On Screen Display is for the DJI Wookong M AutoPilot , A2 M and Ace One series AutoPilots. The iOSD On Screen Display enables the pilot to monitor the real-time flight data from the Wookong M WKM, DJI A2 or Ace One Autopilot systems while in flight using First Person View (FPV).
The DJI iOSD MARK II can record the flight log, which will help you to record the input and output information of every channel, GPS signal, power voltage, home distance and height, etc. (The current iOSD on the market will have flight log function after firmware upgrade.)
The DJI iOSD will allow you to view the following information:
The iOSD is a multifunctional integrated on screen display module which also has a built-in BEC module that supports 3s-6s LiPo batteries (11-26 volts), when used with the Wookong M or Ace One professional autopilot systems, it delivers a total solution for aerial photography with key information clearly displayed around the outside of the screen.
The DJI Innovations iOSD only supports the Wookong M AutoPilot, A2 M and Ace One systems at this time. The iOSD supports two video input sources, one of which can be selected by the R/C transmitter and switched remotely. It can also change the wireless the transmission channel using the wireless video transmission module by DJI. The iOSD can be upgrade in the future by firmware updates.