DJI A2 DBUS Adapter

Excl. VAT: £125.00 Incl. VAT: £150.00

Availability: Pre Order

Pre-Order
Excl. VAT: £125.00 Incl. VAT: £150.00
We Accept: Visa Paypal Amex Master Card
Description

DJI D Bus Adapter for A2 M Flight Controller

 

The DJI D BUS adapter module can provide an eight-way input or output for the A2 M Multirotor Flight Controller. A traditional receiver can be used through D BUS adapter module, or it can be used to extend the output ports on the A2 M. Please refer to the A2 user manual D BUS adapter section for more specific details of the functionality offered. When using a traditional D-BUS receiver with the A2 M, the DJI D-BUS adapter is required.

 

D-BUS Adapter Setup:

Put the switch to the "I" stop, and power on the system. The LED should be on red; otherwise keep the switch at the "I" stop and then power cycle the system.


At the "I" stop, the D-BUS Adapter is converting the PWM signal from traditional receiver to S-BUS signal.


The A2 D BUS adapter comes supplied with 8 female to female servo cables needed to connect the A2 D Bus adapter.

For additional information please visit the DJI A2 product page

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register