AttoPilot 45A Voltage Current Sense Breakout Board

Excl. VAT: £14.15 Incl. VAT: £16.98

Availability: In Stock

In Stock
Excl. VAT: £14.15 Incl. VAT: £16.98
We Accept: Visa Paypal Amex Master Card

AttoPilot 45A Voltage & Current Sense Board

The AttoPilot 45A voltage and current sense is a small PCB, the DC current is determined by measuring a voltage drop across a pair of parallel shunt resistors, then converted to a final analog voltage output by the TI INA-169. Voltage sense is accomplished by scaling to 3.3V ADC range by a precision resistor divider.

The PCB is supplied without leads or connectors. The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering. Smaller gauge leads are considerably easier to solder without creating shorts.


  • Input resistor divider scaled for 13.6V Input voltage (recommended)

  • 51.8V Max

  • 44.7A Max

  • Very low zero current offset

  • Analog current output scaled for 3.3V ADC

  • Self Powered

Dimensions: 4 x 15 x 19mm


Write Your Own Review

Only registered users can write reviews. Please, log in or register