AttoPilot 180A Voltage Current Sense Breakout Board

Excl. VAT: £14.15 Incl. VAT: £16.98

Availability: In Stock

In Stock
Excl. VAT: £14.15 Incl. VAT: £16.98
We Accept: Visa Paypal Amex Master Card

AttoPilot 180A Voltage & Current Sense Board

The AttoPilot 180A is a small voltage and current sense PCB break out board, the DC current is determined by measuring a voltage drop across a pair of parallel shunt resistors, then converted to a final analog voltage output by the TI INA-169. Voltage sense is accomplished by scaling to 3.3V ADC range by a precision resistor divider.

The PCB is supplied without leads or connectors. The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering. Smaller gauge leads are considerably easier to solder without creating shorts.



  • 51.8V Max

  • 178.8A Max

  • Very low zero current offset

  • Analog output scaled for 3.3V ADC

  • Self Powered

  • 4 x 15 x 19mm


Write Your Own Review

Only registered users can write reviews. Please, log in or register