Menu

 
  • Home /
  • ArduPilot Mega Power Module XT60 Connectors

ArduPilot Mega Power Module XT60 Connectors

ArduPilot Mega Power Module XT60 Connectors
Excl. VAT: £16.25 Incl. VAT: £19.50
Excl. VAT Incl. VAT

1 Review(s) | Add Your Review

Availability: In Stock

In Stock
Excl. VAT: £16.25 Incl. VAT: £19.50
OR
We Accept: Visa Paypal Amex Master Card
Description

ArduPilot Mega Power Module XT60 Connectors


The ArduPilot Mega Power Module will work with the ArduPilot Mega 2.5 & ArduPilot Mega 2.6 side and top entry Autopilots. It is a very quick and easy way of providing the ArduPilot Mega 2.5 or 2.6 with a clean power supply from a LiPo battery, the power module also monitors the current consumption and battery voltage through a 6-pos cable. The ArduPilot Mega Power Module has an on-board switching regulator which supplies the output of 5.3V and at a maximum of 2.25 Amp's from Lipo batteries up to a 4S. This Power Module comes completely assembled, there is a choice of connectors, either Deans or XT60's. The Power Module comes wrapped in a clear plastic heat shrink tubing for protection.


Specifications:

  • Max input voltage: 18V

  • Max current sensing: 90A

  • Voltage and current measurement configured for 5V ADC

  • Switching regulator outputs 5.3V and 2.25A max

  • 6-pos DF13 cable plugs directly to ArduPilot Mega 2.5's 'PM' connector

Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, Telemetry radio). It is not designed to power servos., use a uBec or the aircraft's own ESC/BEC for this application.

Reviews

Customer Reviews 1 item(s)

Product manufacture quality looks better than clones.
Great service - I ordered this product to replace a clone version on which the power leads were not properly soldered and failed.
The module supplied has very secure soldering !
Your Rating
Review by Jeff / (Posted on 07/12/2015)

Customer Reviews 1 item(s)

Product manufacture quality looks better than clones.
Great service - I ordered this product to replace a clone version on which the power leads were not properly soldered and failed.
The module supplied has very secure soldering !
Your Rating
Review by Jeff / (Posted on 07/12/2015)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Contact Information

  • Build Your Own Drone Ltd
  • Unit 18 Campbell Court
  • Bramley
  • Hampshire
  • RG26 5EG
  • Phone: 01184020775

Social Media

Site Information

Deliveries & Returns

Service & Support