ArduPilot Mega Power Module Deans Connectors

Excl. VAT: £16.25 Incl. VAT: £19.50

Availability: Pre Order

Pre-Order
Excl. VAT: £16.25 Incl. VAT: £19.50
We Accept: Visa Paypal Amex Master Card
Description

ArduPilot Mega Power Module Deans Connectors

The ArduPilot Mega Power Module will work with the ArduPilot Mega 2.5 & ArduPilot Mega 2.6 side and top entry Autopilots. It is a very quick and easy way of providing the ArduPilot Mega 2.5 or 2.6 with a clean power supply from a LiPo battery, the power module also monitors the current consumption and battery voltage through a 6-pos cable. The ArduPilot Mega Power Module has an on-board switching regulator which supplies the output of 5.3V and at a maximum of 2.25 Amp's from Lipo batteries up to a 4S. This Power Module comes completely assembled, there is a choice of connectors, either Deans or XT60's. The Power Module comes wrapped in a clear plastic heat shrink tubing for protection.


Specifications:

  • Max input voltage: 18V

  • Max current sensing: 90A

  • Voltage and current measurement configured for 5V ADC

  • Switching regulator outputs 5.3V and 2.25A max

  • 6-pos DF13 cable plugs directly to ArduPilot Mega 2.5's 'PM' connector

Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, Telemetry radio). It is not designed to power servos., use a uBec or the aircraft's own ESC/BEC for this application.

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register