ArduIMU+ V3

Excl. VAT: £49.16 Incl. VAT: £58.99

Availability: Pre Order

Excl. VAT: £49.16 Incl. VAT: £58.99
We Accept: Visa Paypal Amex Master Card

ArduIMU V3

ArduIMU V3 features the new MPU-6000, that includes 3 axis gyros & accells built-in and process everything internally that is some kind of dual core power (24-bits ADC sampling and sensor fusion is handled inside the MPU), the latest 3 axis I2C magnetometer HMC-5883L and the classic but very robust Arduino Atmega328 running at 16Mhz...

MPU-6000 uses SPI for max performance.


  • Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format

  • Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps

  • Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g

  • Reduced settling effects and sensor drift by elimination of board-level cross-axis alignment errors between accelerometers and gyroscopes

  • Digital Motion Processing™ (DMP™) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection

  • MotionApps™ Platform support for Android, Linux, and Windows, with Windows Phone platforms on the roadmap

  • Digital-output temperature sensor

  • Digital input on FSYNC pin to support video Electronic Image Stabilization and GPS

  • Programmable interrupt supports gesture recognition, panning, zooming, scrolling, free fall interrupt, high-G interrupt, zero-motion detection, tap detection, and shake detection

  • Full Chip Idle Mode Supply Current: 5µA

  • On-chip timing generator with ±1% frequency variation over full temperature range

  • User self test

  • 10,000g shock tolerant

Other ArduIMU V3 features:

  • Pin compatible with ArduIMU V2.

  • Breadboard compatible (ArduIMU V2 was not!).

  • Smaller size (1.5" x 1.0").

  • Atmega CPU has more % available for other tasks.

  • The 6 analog pins are now available!

  • Arduino compatible and open source.

  • 3 status LED's (RGB).

  • I2C port with 3.3V translation.

  • GPS port with FTDI autoswitch.

  • This device is suitable for ANY application from rockets to simple movement detection.


Write Your Own Review

Only registered users can write reviews. Please, log in or register