Ardu Station Mega V1.5

Excl. VAT: £54.16 Incl. VAT: £64.99

Availability: Pre Order

Excl. VAT: £54.16 Incl. VAT: £64.99
We Accept: Visa Paypal Amex Master Card

Ardu Station Mega v1.5


The long awaited Ardu Station Mega V 1.5 ground station upgrade for basic GCS and Antennatracker use is now here. If you need simple to use and small groundstation for your basic telemetry needs to show flight data, this is your best choice.


The Ardu Station Mega V1.5 only need to have the power cable soldered to the board, all other components are fully assembled on the board and tested for you.You will need to add Xbee's to this system to make it work, these are not included in the kit.


Instruction Manual




  • 128 x 64 Graphic LCD

  • 5v, 2Amp DC/DC Regulator

  • 5v Buzzer for alarms

  • USB connector for laptop connection

  • I2C bus for external devices (such as keyboard, compass, barometer etc)

  • 4 x Serial port (1 for telemetry, 1 for GPS, 1 for laptop, 1 for future use)

  • ATMega32U2 USB adapter

  • ATMega2560 main CPU

  • Voltage measurement for battery voltages

  • SD Card (Optional)

  • Internal status LEDs (4 pcs) with possibility to use them external too

  • 2 Servo output for antenna tracker

  • Servo output has additional power input for high power/current feed

  • 8 analog inputs (5v) for additional measurements

  • Fully compatible Arduino IDE

  • Fully assembled


  • 128 x 64 GLCD

  • ASM Keyboard V1.1 with 6 buttons/2 leds

  • 15 cm EM406 style cable

  • 5v, 2Amp DC/DC regulator

  • Main ASM board v1.3

  • 10cm Power cable with connector (XT60)


Write Your Own Review

Only registered users can write reviews. Please, log in or register