AfroFlight Naze32 Rev.6 10 DOF Flight Controller

Excl. VAT: £14.99 Incl. VAT: £17.99

Availability: Pre Order

Pre-Order
Excl. VAT: £14.99 Incl. VAT: £17.99
We Accept: Visa Paypal Amex Master Card
Description

The Afroflight Naze32 10 DOF Rev6 is one of the most popular and commonly used flight controllers on the market for multi rotor aircraft. It's based around the widely used Baseflight & Cleanflight software. The Naze32 10 DOF is really simple to setup ready for flight, all you need to do is solder on the headers and configure the Naze32 using the cleanflight configurator on your computer. The Naze32 10 DOF version has a 3 axis accelerometer, 3 axis gyro, 3 axis magnetometer and a barometer, these parts all come together to make you aircraft feel more locked in and more stable when flying.

The additional sensors seen on the Naze32 10 DOF over the Naze32 6 DOF enable the flight controller board to make the craft even more stable with the barometer which will aim to hold the altitude of your craft. The Naze32 flight 10 DOF controller has 6 PWM ESC outputs which means it will work with multi rotor crafts up to six motors (hexacopter) and can take either PWM inputs, PPM input or an Sbus input as it already has an Sbus inverter built in to the board. 

Specification

  • Sensors: MPU6500

  • Battery voltage monitoring

  • Built-in FrSky telemetry converter

  • Modern 32-bit processor (STM32 F103)

  • Onboard USB for setup and configuration

  • Extra bright LEDs

  • Modern GUI for all operating systems, Baseflight Configurator

  • 36x36mm size

  • Weight: 6 grams (no headers, 8 grams with)

 

In The Box

  • 1 x Naze32 Rev6 10DOF

  • 1 x RC Breakout cable

  • 1 x 6x3 bent pin header

  • 1 x 6x3 straight pin header

  • 1 x 1x10 straight pin header

  • 1 x 2x5 straight pin header

  • 1 x 3x2 straight pin header

  • 1 x 3x2 bent pin header

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register