DJI F550 Flame Wheel Hexacopter Frame. Build Your Own Drone

Home /
DJI F550 Flame Wheel Hexacopter Frame

Description

The DJI F550 Flame Wheel Hexacopter can be used with either the DJI A2, DJI Wookong M Multi Rotor Controller or Naza M V2 autopilot systems to achieve hovering, cruising, even rolling and other flight elements. It can be used for entertainment, aerial photography, FPV and other aero modelling activities.

The DJI Innovations F550 Flame Wheel frames are built from very strong materials, the arms are made from the ultra strong PA66+30GF material which provides better resistance to damage on hard landings. The main frame plates use a high strength compound PCB material, which makes wiring of ESCs and battery very easy and safer on the lower of the two frame plates which is also the power distribution board. The overall frame design allows enough space when assembled to fit an autopilot systems between the top and bottom plates of the Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight, other coloured arms in black are available.

These frames are very easy to build and are held together by a set of shouldered bolts, the bolts pass through the predrilled holes in the top and bottom frame plates of the F550 Flame wheel frame into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F550 Flame Wheel frame is very solid, and are able to put up with a great deal of use or abuse!

F550 User Manual v1.0

Model	DJI F550 Flame Wheel
Frame Weight	478g
Diagonal Wheelbase	550mm
Take-off Weight	1200g ~ 2400g
Recommended Propeller	9450 Propeller
Recommended Battery	3S~4S LiPo
Recommended Motor	22 x 12mm (Stator size)
Recommended ESC	E305 Lite ESC

Reviews

Customer Reviews 1 item(s)

Great Quality

Having 1st tried one of the clone F550's which wasnt brillient i decided to give the proper F550 from DJI a go and it is of such a better quality than the clone would never go back to a clone again as this is nice and strong and well made