DJI F330 Flame Wheel Multi Rotor Quadcopter ARTF Build Your Own Drone

Home /
DJI F330 Flame Wheel Multi Rotor Quadcopter ARTF Kit

Description

DJI F330 Flame Wheel multi-rotor QuadCopter frame ARTF kit is designed for all pilots for fun or with the use of an autopilot.

The F330 Flame Wheel can be used with the NAZA autopilot systems to achieve hovering, cruising, even rolling and other flight elements. It can be used for entertainment, FPV flights and other aero modelling activities.

The F330 Flame Wheel multi rotor QuadCopter frame kit comes with:

The DJI F330 Flame Wheel frames are built from very strong materials, the arms are made from the ultra strong PA66+30GF material which provides better resistance to damage on hard landings, while the main frame plates use a high strength compound PCB material, which makes wiring of ESCs and battery easier and safe on the lower of the two frame plates which is also the power distribution board. The overall frame design provides enough space when assemble to fit an autopilot systems between the top and bottom plates of the Flame Wheel. The arms supplied in the kit are different colours, 2 red and 2 white to allow for improved visual orientation in flight, other coloured arms in black are available.

These frames are very easy to build and are held together by a set of shouldered bolts, the bolts pass through the predrilled holes in the top and bottom frame plates of the F330 Flame Wheel into the top and bottom of the arms, a total of 6 bolts per arm holds the frame plates in place and ensures that the F330 Flame Wheel frame is very solid, and are able to put up with a great deal of use or abuse!

Please note: this is the F330 Flame Wheel ARTF Kit comes with a set of matched motors, props & ESC's, you will still need to add a flight controller to this setup. Please visit the DJI NAZA F330 Flame Wheel Kit page for the ARTF kit with Flight Controller.

DJI Naza FAQ's

F330 User Manual v1.6

Model	F330 Flame Wheel
Frame Weight	156g
Diagonal Wheelbase	330mm
Takeoff Weight	600g ~ 1200g
Recommended Propeller	8 x 4.5in
Recommended Battery	3S~4S LiPo
Recommended Motor	22 x 12mm (Stator size)
Recommended ESC	18A OPTO

Reviews