Call us:01189 38 01 39

DJI LightBridge
Product PDF

Be the first to review this product

Availability: Only a few left In Stock

Excl. Vat: £832.50 Incl. Vat: £999.00
OR

Quick Overview

DJI LightBridge

DJI LightBridge

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

You may also be interested in the following product(s)

DJI Zenmuse Z15 GH4 HD + DJI LightBridge HD Video Link 2.4G

DJI Zenmuse Z15 GH4 HD + DJI LightBridge HD Video Link 2.4G

Excl. Vat: £2,304.16 Incl. Vat: £2,764.99
     

DJI LightBridge


Features

DJI LightBridge


The DJI Lightbridge is a Full HD digital video downlink running on the 2.4 Ghz frequency. The DJI Lightbridge offers extremely powerful, small and light-weight form factor. The live HD video streams up to 1920 x 1080p @30fps from up to 1 mile away, which means that it is the ideal solution for the professional aerial photographer and First Person View / FPV users. The DJI Lightbridge will remove the limits from low definition analog video transmitters.

The DJI Lightbridge has a ground station which is less than 100mW which is in compliance with CE and FCC certification, there will be an option to add an optional 14 dBi patch antenna to boost transmission distance tremendously, and predictions are 3.0 miles in the right conditions with this upgraded antenna.

When connecting up the Lightbridge you will find that there are a number of DJI and industry standard connectors to allow the integration of the Lightbridge into your workflow with minimal disruption, AV input, HDMI input, DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data) HDMI HD image output and USB 2.0 image data output for iOS and Android phones and tablet synchronization.

The use of the 2.4 GHz in the Lightbridge means that you are able to connect up your remote control and video system together to allow a seamless link to your aerial platform, the DJI Lightbridge supports two remote controls: one for flight control (10 Channels) and the other for gimbal control (6 Channels). Control signals are received in the air and then transmitted to the flight controller through the S-BUS / D-BUS system. Remote control data travels to the uplink via the TX-Thru Port at the same time that video is streamed back down all without interference so there will be no issues using your radio system. If the video transmission system is used as a standalone system it is not recommended to use a 2.4 Ghz radio system as there can be issues, only use 2.4 GHz radios via the S-BUS / D-BUS system.

DJI’s Lightbridge has a Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS) technology is used for the uplink transmission to enhance the stability of the connection and offer anti-jamming capability. The use of this FHSS and DSSS means that up to 8 downlinks can be connected for parallel streaming and work independently without interference from one another. The Lightbridge supports "MIMO", multi-antenna technology and OFDM modulation methods, these along with the advanced algorithms are utilized for downlink transmission to enhance data bandwidth, improving dynamic performance and increasing stability even in challenging environments, any interference is constantly checked for and is monitored during the downlink transmission with an automatic switching between 8 channels for the best possible signal all of the time with a Maximum latency of up to 80ms.

No additional equipment is required with the Lightbridge for OSD functions when used with DJI A2, DJI Wookong-M and Naza-M V2 flight controllers, the flight parameters will be displayed onscreen when desired, the OSD functionality can be turned off via the mobile software for HDMI and iOS / Android Output.

A single Lightbridge air unit can transmit to multiple ground units sending video to multiple screens. (Only one of the ground units can be used to send a control signal while additional ground units will only be able to receive a video signal). The Lightbridge encryption ensures only authorized devices can receive data which can be programmed via mobile device software.

The Lightbridge ground unit has a high capacity 4000mA battery built in offering up to 4.5hours of use per charge, it is rechargeable through the supplied charger or via a 3S~6S Li-Po power battery, there is a USB charger port for mobile devices, this prolongs the life of peripheral equipment with a battery status level indicator. A full charge of the Lightbridge battery takes approximately 1.5 hours.

The aluminum alloy casing with extreme internal and external shielding for interference protection means that the Lightbridge will deliver the best possible performance and HD Video.

Please Note, this product is very new to the market place and there have been a number of updates where the core functions of the firmware have been changed and this will change the functions of the Lightbridge, for the latest updates on the firmware updates and functions please check the release notes found at DJI's Lightbridge information page to ensure the system will work with your system.

 

Video Input

HDMI, AV, DVSB(For DJI Gimbals)

Supported Formats(HDMI)

720p50, 720p60, 1080i50, 1080i60, 1080p25, 1080p30,

1080P50, 1080P60

Supported Formats(AV)

PAL25, NTSC30

Radio Frequency

2.405-2.4835GHz, FCC/CE certified

Interface (Ground Unit)

LED indicator

Power switch

Charging interface

USB 2.0

HDMI

Remote control input (supports two controllers)

Interface (Air Unit)

LED indicator

DBUS

HDMI

AV

Gimbal Port

Frequency switching button

External Case

Aluminum alloy

Power supply

(Ground Unit)

DC power input: 11-26V

Built-in lithium battery

Power consumption: 6W (without external USB equipment)

Power consumption: 8W (with external USB equipment)

Power supply (Air Unit)

DC power input: 11-26V

Power consumption: 8W (during normal use)

Dimensions

Ground unit: 125mm x 89mm x 20mm,

Air Unit: 67mm x 47mm x 20mm

Weight

Ground unit: 360g,

Air unit: 70g